Singapore, the company sent the product to test at PSB Corporation, Singapore. According to the Test Result No. 54S042507/JC, the product passed the test with fire extinguishing capability level of Class A, Class B, and Class C, and passed the test according to the test manual specifications of fire extinguishing ball of Thailand’s Department of Science Service. The test result specified that the product passed all the requirements. Later, PBS conducted lab test and analysis (now merged as TUV SUD) that ELIDE FIRE extinguishing ball is not an explosive material. It is a product that can be used with Singaporean citizens according to the Test Report No. 57S044877-LPL Energy Dispersive X-ray (EDX)

Malaysia, the product was sent for testing. The Test Report No.2005FE0031 from SIRIM QAS INTERNATIONAL, Malaysia, certified that the product passed the fire extinguishing capabilities of Class 1A, Class 5B, and Class C. The test was conducted according to the test manual specifications for fire extinguishing balls of Department of Science Service Vol. February 2003. The product received Certificate No. JBPM/IP/BKK: 700-1/4 Jld.2 (22) from Fire and Rescue Department, Malaysia. The test result was showed that the fire extinguishing ball can extinguish fires of Class 1-A*, Class 5-B*, and Class C*. Later, Fire and Disaster Management Office, according to Official Letter No. JBPM: PPP/005/24/1 Jld. 1 (9) dated 4 June 2006, approved “fire extinguishing ball” as an accessory for existing fire prevention system in premises or buildings by placing the fire extinguishing ball at the location that does not obstruct the existing fire extinguisher and fire prevention system when an emergency or fire occurs in related premises or buildings.

Ghana, the product was sent for testing and received Elide Fire extinguishing ball Product Certificate No. NFS/OPT/SF.4D Vol. IV/24 from the National Fire Disaster Service of Ghana on 2 March 2006 approving that the fire extinguishing ball has the fire extinguishing capability of Class A, Class B, and Class C.

Nigeria, the product was sent to request fire extinguishing demonstration certificate for the fire extinguishing ball, according to the Official Letter No. FS.388/VOL.1/2 dated 14 June 2006. The product was tested by Alausa State Fire and Safety Service Office (tested on 20 June 2006). The test found that the product could efficiently extinguish fire and was suitable for preliminary fire extinguishing. On 7 November 2006, the product receives a certificate from Lagos State Fire Service Federation. The practical demonstration of ELIDE FIRE extinguishing ball within the fire extinguishing and safety service station certified that the fire extinguishing ball was appropriately tested under control and found that the product is efficient in fire prevention, is environmentally friendly, does not cause damage to property, and is not an explosive material. On 3rd November 2007, the product was registered with Product Standard Organization. ELIDE FIRE extinguishing ball was registered by Standards Organization of Nigeria Conformity Assessment Program (SONCAP) according to the Official Letter No. COSG011333. This product registration approved that ELIDE FIRE extinguishing ball can be sold in Nigeria by specifying product name and manufacturer as Siam Safety Premier Co., Ltd. Thailand only. The company was renamed Elide Fire Ball Pro Co., Ltd. Registration No. 0205542003581

Qatar, the product was sent for testing and received the Test Report No. 114/LHU/XI/2016 approving the fire extinguishing ball by Qatar Fire Service Unit on 12 October 2016 to be imported and sold.

South Africa, the product was sent for testing and received the Test Report No. FPE/84935/08 from South African Bureau of Standards (SABS) on 18 November 2008 that the product passed the capability level test of Class A, Class B, and Class C fires by testing according to the test manual specifications for fire extinguishing ball by Department of Science Service of Thailand Vol. February 2003 as a firefighting product.

India, the product was sent for testing and received Test Report No. NTH (ER)/CH (S)/2008/0015, the fire extinguishing chemical test report of the product sample was sent to the lab. Testing found that the sample product had no toxic metal and was generally safe for the environment in terms of pollution, from National Testing Agency of India on 26 February 2008. Certification Document No. S-29023/109/2008/ S&T/Fire Ball-Approval/927 from Ministry of Labor and Employment, Office of Director General of Safety in Mining Industry, India on 25 October 2008 approved using the product in mining industry as a firefighting product.

Ivory Coast

Ivory Coast, the product was sent for testing and received Product Certificate for Elide Fire extinguishing ball No. FCT/AMMC/FSD/FPP/282 from Abuja Fire Service on 24 July 2009. The fire extinguishing ball is able to extinguish fire (Class A, B, C, D) and work on human hands without any harm.

On 25 August 2015, the product received Certificate No. 505/MEMIS DG-ONPC/DPD/Training from National Civil Protection Office, Ministry of Interior and Security of Ivory Coast specifying the product as the fire extinguisher that is easy to use and no training required.

Uganda, the product was sent for testing and received Product Certificate for Elide Fire extinguishing ball No. FB/138/72 by Uganda Police Fire Brigade on 20 January 2009. The test result certified that Elide Fire extinguishing ball is an efficient fire extinguisher for fire suppression. It can be using for monitoring and it works automatically when exposed to flame. Capability to extinguish fire Class A, B, and C. It can be added to the armory of fire extinguishing system of equipment in the country with existing firefighting equipment.

Australia, South Australian Metropolitan Fire Service tested the “fire extinguishing ball” on 5 February 2007 and issued the certificate on 13 February 2007. The test result of ELIDE FIRE extinguishing ball was reported to Safe Work S’A by Mr. Roy Thompson, Commander Community Safety, MFS Fire Investigator Steve Daviess, Scientific Officer Krystle Williams and Community Safety District Officer Allan Foster. The product was demonstrated at MFS training center, Angle Park.

Ukraine, the company authorized LAVAN KYIV Company to distribute the product to sub-units in Kyiv Oblast. Ministry of Emergencies of Ukraine issued Official Letter to LAVAN KYIV Company dated 28 February 2012 No. 9/2/132 to certify efficiency of Elide Fire extinguishing ball that the fire extinguishing ball (BALL-1) was used in 15 events. In 11 events, the product was used during the firefighting operation by the fire service unit. In the other 4 events, the product was used in a simulation. After studying the use of the fire extinguishing ball (BALL-1), Regional headquarters in Kyiv Oblast concluded that the ball was efficient for fire suppression in limited space, especially the operating area, like bedroom, cabin, and engine room, which could be damaged by fire. It was considered suitable for being installed on the fire engine to prepare for operation using 10 fire extinguishing balls (BALL-1) per 1 fire engine to increase preliminary fire extinguishing efficiency. Good result.

Having studied the use of Ball-1 fire-extinguishing appliances, the Regional Head Office in

Kyiv Oblast concluded that their use may be efficient for the suppression of fires in confined

spaces, directly at the local process area, where there is a fire hazard, as well as in the

passenger and engine compartments of vehicles. We consider it expedient to equip fire

engines at operational readiness with Ball-1 fire-extinguishing appliances, 10 per each fire

engine, for more efficient extinguishing of fires in the initial phase.

On 17 June 2014, the Official Letter from the State Emergency Service of Ukraine, Department of Resources Supply No. 211-744/01 to LAVAN KYIV Company, the company’s agent, stated that Department of Resources Supply assessed the efficiency of the fire extinguishing ball (BALL-1) and found that the product was efficient in fire extinguishing in limited space especially the fire scene with a danger of fire and worked well.

Algeria, the product was sent for testing and received Product Certificate for Elide Fire extinguishing ball No. 9625DGPC/2015 from Department of Civil Protection, Ministry of Interior and Local Governments, Algeria on 15 July 2015. The product could extinguish fire quickly and efficiently.

Chile, the product was sent for testing and received the Test Report of Elide Fire extinguishing ball No. SCD-13440 & SCA-13441 by CESMEC, a company under Bureau Veritas, Chile on 15 June 2016 that certified its fire extinguishing capability of Class 1A and 1B. The test was conducted according to the test manual specifications by Ministry of Science and Technology Vol. February 2003, so consumers could use the product for firefighting.

Romania, the product was sent for testing and received Certificate for Elide Fire extinguishing ball No. 4.757.474/7 from Ministry of Internal Affairs of Romania on 22 December 2016 so consumers could use the product for firefighting.

Argentina, the product was sent for testing and received the Test Report of Elide Fire extinguishing ball No. 131-239 by National Institute of Industrial Technology (INTI), Argentina on 23 March 2017 that the product passed the test of fire extinguishing capability of Class 1A and 1B. The test was conducted according to the test manual specifications by Ministry of Science and Technology Vol. February 2003, so consumers could use the product for firefighting.

Mexico, the product was sent for testing and received the Test Report of Elide Fire extinguishing ball No. (7617)156-0072 by Bureau Veritas Consumer Products Services Mexico on 15 June 2017 that it passed the fire extinguishing capability of Class 1A and 1B. The test was conducted according to the test was conducted according to the test manual specifications by Ministry of Science and Technology Vol. February 2003, so consumers could use the product for firefighting.

Egypt, the product was certified by Civil Protection Authority of Egypt that Elide Fire extinguishing ball could be used for security in closed limited space. It also received certification from an international laboratory and was approved by EOS. (Egyptian Organization for Standardization & Quality)

Saudi Arabia, the product was certified by Saudi Standards, Metrology and Quality Organization (SASO) on 23/04/2020, referring to the test report from Notify Body: NB 1395, and CE reference documents and technical specifications EN standard according to Directive 2013/29/EU that it was safe and was a firefighting device.

Turkey, Turkish product standards (TURKISH STANDARDS INSTITUTION) Officers from TURKISH STANDARDS INSTITUTION tested and issued the standard according to the “fire extinguishing ball test manual of Department of Science Service”, Kingdom of Thailand, as TURKISH STANDARDS INSTITUTION’s product standard of “Fire Extinguishing Ball”. The standard test criterion is called TSE K39. The letter dated on 02.07.2012 from the standard institution. The product received a certificate No. 14.0.30.4.34.00/TSEK-31552 that it could extinguish fire Class 5A and detecting and extinguishing fire Class 55B of TURKISH STANDARDS INSTITUTION and could be used as a firefighting device.