ELIDE FIRE Fire Extinguishing Ball “Life Saver” 400 g

คุณสมบัติสินค้า:

หมวดหมู่ : Products

Technical information:
  •  Weight of the extinguishing agent: 390 g (+ or - 0.2 g)
  •  Total weight: 400 g (+ or - 10 g)
  •  Diameter: 105 mm
  •  Activation time: 3 - 10 sec on contact with the flame
  •  Audible warning signal: 90 - 110 dBA
  • Usability and storing temperature: Not less than - 40°C and Not over +85°C
  • Activation time: 3 - 10 sec on contact with a flame
  • Lifespan: 2 years
  • Installed 2 units above the engine compartment
  •  CE marking NB: 1395 – P1-0128/2010

ELIDE FIRE® provides extinguishing and monitoring
of all classes of fires:
  • Class G* ( Fire caused by liquid or flammable gas in the engine room)
For classes G only, do not use this variation for classes A, B, C, and F,  the ELIDE FIRE® extinguishing ball is used for passive protection only.

Warning: Do not install nearby the exhausting pipes in the engine room because ELIDE FIRE® may get damaged

How does it work?

In just 3 to 10 seconds after contact with the flame, the pyrotechnic capsule located inside the product is activated thanks to a system of wicks present on the external surface of the extinguisher ball. An immediate burst is caused: the extinguishing powder is dispersed over an area of the engine room. The resulting blast then pushes the oxygen out of the fire zone, and the fire is extinguished instantly. The extinguishing agent then creates a film on the burning material, which definitively breaks the combustion phenomenon.

     

How to use it?

It's very simple, install two ELIDE FIRE  Fire Extinguishing Ball “Life Saver” 400 g above the engine compartment, pipelines , fuel lines , or the battery. However, Do not install near the exhausting pipes in the engine room because the Fire Extinguishing Ball  may get damaged.

 

 


 

Powered by MakeWebEasy.com